PXE1410CDM-G003 Booting Failures: Top 5 Fixes
When you encounter a boot failure with the error code PXE1410CDM-G003, it typically indicates a problem during the boot process, where the system is unable to find a proper boot device or connect to a network boot server. This issue can arise for various reasons, from incorrect settings in the BIOS to hardware problems. Here's an easy-to-follow guide to help you troubleshoot and fix the issue step by step.
Common Causes of PXE1410CDM-G003 Booting Failures:
Incorrect Boot Order in BIOS/UEFI: One of the most common causes of this error is a misconfigured boot order. The computer may be attempting to boot from a network location (PXE boot) rather than a local storage device like the hard drive or SSD.
No Boot Device Detected: The system might not detect any bootable device (e.g., hard drive, SSD) due to a connection issue or hardware failure.
Network Booting Misconfiguration: If the system is incorrectly set to boot via PXE (Network Boot) when there is no network server configured, this can lead to the PXE1410CDM-G003 error.
Corrupt Boot Files: If the boot sector or system files on the hard drive are damaged or corrupted, the system will fail to boot properly, triggering this error.
Hardware Failure: In rare cases, faulty hardware, such as a damaged hard drive, defective memory module , or motherboard issue, may cause boot failures.
Step-by-Step Solutions to Fix PXE1410CDM-G003 Booting Failures:
1. Check the Boot Order in BIOS/UEFIAccess BIOS/UEFI Settings:
Turn on your computer and immediately press the BIOS key (usually F2, Delete, or ESC depending on the manufacturer).
Look for the Boot or Boot Order settings.
Correct the Boot Sequence:
Ensure that your primary boot device (usually your hard drive or SSD) is set as the first boot option.
If PXE or Network Boot is listed first, move it down the list.
Save changes and exit BIOS.
2. Verify the Boot Device is Properly ConnectedCheck Hard Drive/SSD Connections:
Turn off the computer and unplug the power cord.
Open the case (if you are comfortable doing so) and check the cables connecting your hard drive or SSD to the motherboard.
Make sure everything is securely plugged in.
Test with Another Device:
If possible, try connecting a known working boot device to see if the system will boot correctly.
3. Disable PXE Boot if Unnecessary Disable PXE Boot in BIOS: Go to the Network Boot or PXE Boot settings in BIOS and disable them if you do not need to boot from a network. This will prevent the system from attempting to boot via network and help avoid the PXE1410CDM-G003 error. 4. Repair or Reinstall Boot FilesUse Windows Recovery Options:
If the boot files on the hard drive are corrupted, you can use a Windows Recovery Drive to repair the system.
Insert a recovery drive (USB stick) and boot from it.
Select Repair your computer and then go to Troubleshoot > Advanced Options > Startup Repair.
If Startup Repair doesn’t work, you may need to use Command Prompt to fix boot-related files with commands like:
bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcdReinstall Windows (if necessary):
If repairs fail, you may need to reinstall Windows. Make sure to back up your data before performing a full reinstall.
5. Check for Hardware FailuresRun Diagnostics:
Many manufacturers provide built-in diagnostic tools that can check for hardware issues. Run these diagnostics to identify any faulty hardware.
Check Hard Drive Health:
If your hard drive or SSD is showing signs of failure (e.g., clicking sounds or unusual behavior), consider replacing it with a new one.
Replace Faulty Components:
If diagnostics reveal faulty memory, hard drive, or other components, replace them as necessary.
Final Thoughts
By following these troubleshooting steps, you should be able to resolve the PXE1410CDM-G003 boot failure and get your system back up and running. Start by checking the BIOS settings, ensuring your boot device is correctly configured, and eliminating any unnecessary network booting. Then, verify that your hardware is in good condition and, if needed, repair or reinstall your operating system.
If these steps don’t resolve the issue, it may be time to consult with a professional technician who can diagnose the problem more thoroughly.
